Ganzkuhl
This is a High SRI /Solar heat reflective coating/Ceramic-based Heat-Reflective Coating. A product for A SUSTAINABLE TOMORROW
With the rise in temperature on a Year-On-Year basis This is across the country. We need such products to create better living spaces.
This is the solution for “Urban heat islands” which occur when cities replace natural land cover with dense concentrations of pavement, buildings, and other surfaces that absorb and retain heat. This effect increases energy costs (e.g., for air conditioning), air pollution levels, and heat-related illness and mortality. Climate change and heat islands interact in important ways.
This continued warming is expected to worsen heat islands in the future as urban population densities increase and natural land areas decrease, heat islands will strengthen. Communities can address and respond to these trends by taking action to reduce their local heat islands. For example, strategies such as installing cool roofs and increasing tree canopy can lower heat island temperatures and lessen the exposure and sensitivity of city residents to climate change impacts, while also lowering the greenhouse gas emissions that cause climate change.
Increased Health Risks
When people are exposed to extreme heat, they can suffer from potentially deadly illnesses, such as heat exhaustion and heat stroke. Hot temperatures can also contribute to deaths from heart attacks, strokes, and other forms of cardiovascular disease.
Efforts to reduce heat islands can help mitigate climate change. In addition to lowering urban temperatures, heat island reduction strategies lessen electricity demand for air conditioning and thereby reduce
Green roofs and some types of cool pavements can diminish heat islands
WHERE ALL GANZKUHL CAN BE USED
- Residential buildings, top floor which has a terrace exposed to direct sunlight throughout
-
Make shift offices in containers located at all construction sites, Security cabins
-
Industries operating in metal sheds face even more hostile heating. This results in the dropping of the efficiency of the workers, due to the extreme heat.
-
The products stored also undergo some damage due to extreme heating.
-
Use of forced ventilation solves this problem to some extent but does not cut the incoming heat due to the sun.
-
Chemical Industry: During chemical storage, the rising temperatures would transfer greater heat to the inside of the storage tanks. This would result in:
- Greater evaporation: Loss in material
- Risks from the release of evaporation products
- Fire hazards, in case of volatile materials
- Impact on transportation:
- Airports are the worst hit: they are large flat structures – so more heating and more water seepage.
- Drawing the parallel, this issue exists with any transportation: road and rail.
- The railways too would need a solution to reduce the heating, as it would have a direct impact on their AC costs.
Salient features of this cool coating
High Heat Reflectivity
98.6% of the Sun’s heat is reflected. This creates a cooler interior for the building.
Waterproof Layer
Save money as no need to apply another waterproofing chemical.
Durable Walkable Surface
Roof remains usable
No impact of fungus, bacteria, or algae
The roof remains clean!
FAQ
Have You Any Question?
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo. Nisi porta lorem mollis aliquam ut. Posuere ac ut consequat semper viverra nam libero justo. Integer eget aliquet nibh praesent tristique magna sit amet purus.
How It Can Be Works?
Lorem ipsum dolor sit amet, vis an nihil tation doctus, mel ne iriure accusam evertitur. Te omnes repudiandae pri, dolores appetere incorrupte id nam.
How Can I Get A Promo?
Lorem ipsum dolor sit amet, vis an nihil tation doctus, mel ne iriure accusam evertitur. Te omnes repudiandae pri, dolores appetere incorrupte id nam.
Is Pay Later Available?
Lorem ipsum dolor sit amet, vis an nihil tation doctus, mel ne iriure accusam evertitur. Te omnes repudiandae pri, dolores appetere incorrupte id nam.
MULTI-UTILITY OF GANZKUHL® coating
- Multiple Base Substrates: GanzKuhl® Coating can be used for
- Concrete Slabs
- Galvanized / coated Metal sheets
- Cloth
- Wood
- Rubber Sheet (limited adherence)
- Ease of Application:
- Easily applied by brushing or with rollers.
- Can be applied by any painter following the correct instructions.
- Surface preparation of the Roof:
- It is necessary to adequately prepare the surface of the roof by scratching or brushing, to remove any loose PCC or concrete.
- The surface then needs to be cleaned and washed thoroughly with water.
- Allow the surface to dry thoroughly prior to starting the coating.
Coating:
The primer application is the first stage. Prepare the primer as per the formulation in the Instruction Sheet.
Once the primer coating has dried the ready mix of GANZKUHL® can be applied on the Roof Top by brushing. Allow one coat to dry, before applying the second coat.
The drying time is usually 2~3 hours. Check the surface by touching it with any blunt object – if it does not go through, the surface is dry. After application of the second coat, let the coated surface be exposed to open sunlight for two days, before using the surface
Coverage: One kilo of GANZKUHL® covers approximately ~25 sq. ft. of area.
Ganzkuhl®: simulation comparison with uncoated Aluminium substrate
